Thingiverse STL link will be provided) Sidecutter or tinsnips 1.5mm hex wrench Soldering iron (and solder) Utility knife Flat head screwdriver Hot Glue Gun HammerģD printed parts 2 - M2/1. What you'll need for this build is the following:ģD printer (or have a friend print it for you. Pondering how I'd do this for a while, I came up with a really good solution that I thought I'd share with you good folks. Looking at the plug on the back of the machine, I figured this would be a good candidate for a 3D printed solution. Looking around on ebay, I discovered that it could cost me upward of $50.00 including delivery to get one of these funky cords delivered. So as the story goes, I picked up an Apple PowerMac G5 Quad Core A1117 and as luck would have it, it didn't come with a power cord. Apple Computer, Power Macintosh G5 2.0 GHz (Dual Core), Power Macintosh G5 2.3 GHz (Dual Core), Power Macintosh G5 2.
0 Comments
Leave a Reply. |